Skip to content

Built to order in our own factory · Worldwide shipping · Reply within 24 hours

Get a quote
Guide hub

Livestock Equipment Selection & Maintenance Guides

Most equipment on a livestock farm does not fail — it gets installed slightly wrong, then wears out early doing a job it was never quite set up for. This section is about the practical end of ownership: getting things in straight and safe, keeping them working, and knowing which maintenance actually prevents breakdowns rather than just filling a checklist.

What these guides cover

Start here

Measure the building before you choose the equipment

The most expensive mistakes we see are not bad products; they are good products that do not fit. A door that needs 300 mm more header than the building has, a fan sized for a wider span, a feed line that is 400 mm longer than the pen. Because we fabricate to order, a set of real dimensions — not catalogue sizes — turns most of these problems into non-problems before anything is cut.

What we send with an order

Every custom build leaves our factory with CAD layout drawings and assembly instructions, and we confirm drawings and photographs with you before shipping. If something needs working through during installation, remote video guidance and spare parts support are part of the deal rather than an extra.

Browse the equipment

The full range is at livestock equipment. If you are not sure which category a problem belongs to, describe the problem in an enquiry — it is usually faster than matching it to a product name.

01 — Newest first

All guides in this topic

Ask about equipment for this job

Send dimensions, quantity, photos or drawings. We reply within 24 hours on working days with a quotation or questions.

Get a quote